3D Printers: Difference between revisions

From Claremont MakerSpace
No edit summary
Line 25: Line 25:
The [[Digital Fab. and Electronics Lab]] hosts two 3D printers made by [https://www.lulzbot.com/ Lulzbot].  
The [[Digital Fab. and Electronics Lab]] hosts two 3D printers made by [https://www.lulzbot.com/ Lulzbot].  


== Print Area ==
==Print Area==
The Lulzbot Taz 6 maximum print volume is 28 0mm x 280 mm x 250 mm (11.02 in x 11.02 in x 9.8 in).<br>
The Lulzbot Taz 6 maximum print volume is 28 0mm x 280 mm x 250 mm (11.02 in x 11.02 in x 9.8 in).<br>
The Lulzbot Mini maximum print area  is 152 mm x 152 mm x 158 mm (6 in x 6 in x 6.2 in).
The Lulzbot Mini maximum print area  is 152 mm x 152 mm x 158 mm (6 in x 6 in x 6.2 in).


== Filament ==
==Filament==
Both printers use 2.85mm / 3mm filament. Capable materials are: ABS, PLA, HIPS, PVA, wood filled filaments, Polyester (Tritan), PETT, bronze and copper filled filaments, Polycarbonate, Nylon, PETG, conductive PLA and ABS, UV luminescent filaments, PCTPE, PC-ABS, Alloy 910. (Note: Printing with carbon fiber filaments is not recommended at this time because carbon fiber filaments can degrade both the nozzle and hot end of the LulzBot Mini Tool Head.) The Claremont Makerspace encourages the use of PLA as the odor is minimal. To print with something other than PLA please obtain shop lead approval prior to printing.
Both printers use 2.85mm / 3mm filament. Capable materials are: ABS, PLA, HIPS, PVA, wood filled filaments, Polyester (Tritan), PETT, bronze and copper filled filaments, Polycarbonate, Nylon, PETG, conductive PLA and ABS, UV luminescent filaments, PCTPE, PC-ABS, Alloy 910. (Note: Printing with carbon fiber filaments is not recommended at this time because carbon fiber filaments can degrade both the nozzle and hot end of the LulzBot Mini Tool Head.) The Claremont Makerspace encourages the use of PLA as the odor is minimal. To print with something other than PLA please obtain shop lead approval prior to printing.
<br>
<br>
Line 35: Line 35:
The CMS provides white, black, and grey filament for member projects in the humidity-controlled bin located between the two printers. The cost is .04 a gram (weight includes support material). You can weigh your part post-print on the scale and leave cash only in the lockbox under the Taz 6. There is some storage space for member filament in the humidity-controlled clear box. Clearly label your personal filament or it may get used. Please keep the box closed and filament stored when not in use.  
The CMS provides white, black, and grey filament for member projects in the humidity-controlled bin located between the two printers. The cost is .04 a gram (weight includes support material). You can weigh your part post-print on the scale and leave cash only in the lockbox under the Taz 6. There is some storage space for member filament in the humidity-controlled clear box. Clearly label your personal filament or it may get used. Please keep the box closed and filament stored when not in use.  


== Slicing Software ==
==Slicing Software==
CMS laptops are loaded with the latest version of [https://www.lulzbot.com/cura Cura Lulzbot Edition].  
CMS laptops are loaded with the latest version of [https://www.lulzbot.com/cura Cura Lulzbot Edition].  


== Octoprint ==
==Octoprint==
Octoprint is available on the CMS internal network. Currently, it is the recommended method for accessing the Lulzbot Mini. There have been problems with the Taz 6 stopping a print when Octoprint connects, so it is not recommended you access it while the printer is actively printing.
Octoprint is available on the CMS internal network. Currently, it is the recommended method for accessing the Lulzbot Mini. There have been problems with the Taz 6 stopping a print when Octoprint connects, so it is not recommended you access it while the printer is actively printing.
http://172.18.142.34 - Lulzbot Mini<br>
http://172.18.142.34<nowiki/>or http://octopi-lulzbot-mini.sawtooth.claremontmakerspace.org/<nowiki/>- Lulzbot Mini<br>
http://172.18.142.42 - Lulzbot Taz 6
http://172.18.142.42 or http://octopi-taz-6.sawtooth.claremontmakerspace.org/<nowiki/>Lulzbot Taz 6


== Printer Etiquette ==
Again, please note that both of these links only work when you're on the Claremont Makerspace's network.
Always choose the smallest printer that can fit your print.<br>
 
==Printer Etiquette==
Always choose the smallest printer that can fit your print.


As the printer area can be dusty, it is suggested you clean the printer bed prior to printing (a simple wipe with a paper towel and IPA (isopropyl alcohol) should suffice). If there are not paper towels and IPA in the print area, email the shop leads at [mailto:[email protected] [email protected]]. If when removing your print you find it has left a residue, clean the bed. If you must remove another member's print, do so as carefully as possible, and place in the labeled bin. If you must switch filaments, make sure to place the filament in the humidity-controlled bin.
As the printer area can be dusty, it is suggested you clean the printer bed prior to printing (a simple wipe with a paper towel and IPA (isopropyl alcohol) should suffice). If there are not paper towels and IPA in the print area, email the shop leads at [mailto:[email protected] [email protected]]. If when removing your print you find it has left a residue, clean the bed. If you must remove another member's print, do so as carefully as possible, and place in the labeled bin. If you must switch filaments, make sure to place the filament in the humidity-controlled bin.

Revision as of 00:23, 14 March 2020

Lulzbot Mini
3D printer
Make Aleph Objects
Model Lulzbot Mini
Specs
Manual
Requires
Certification
Yes
In Shop Digital Fab. and Electronics Lab
Lulzbot Taz 6
3D printer
Make Aleph Objects
Model Lulzbot Taz 6
Specs
Manual
Requires
Certification
Yes
In Shop Digital Fab. and Electronics Lab

The Digital Fab. and Electronics Lab hosts two 3D printers made by Lulzbot.

Print Area

The Lulzbot Taz 6 maximum print volume is 28 0mm x 280 mm x 250 mm (11.02 in x 11.02 in x 9.8 in).
The Lulzbot Mini maximum print area is 152 mm x 152 mm x 158 mm (6 in x 6 in x 6.2 in).

Filament

Both printers use 2.85mm / 3mm filament. Capable materials are: ABS, PLA, HIPS, PVA, wood filled filaments, Polyester (Tritan), PETT, bronze and copper filled filaments, Polycarbonate, Nylon, PETG, conductive PLA and ABS, UV luminescent filaments, PCTPE, PC-ABS, Alloy 910. (Note: Printing with carbon fiber filaments is not recommended at this time because carbon fiber filaments can degrade both the nozzle and hot end of the LulzBot Mini Tool Head.) The Claremont Makerspace encourages the use of PLA as the odor is minimal. To print with something other than PLA please obtain shop lead approval prior to printing.

The CMS provides white, black, and grey filament for member projects in the humidity-controlled bin located between the two printers. The cost is .04 a gram (weight includes support material). You can weigh your part post-print on the scale and leave cash only in the lockbox under the Taz 6. There is some storage space for member filament in the humidity-controlled clear box. Clearly label your personal filament or it may get used. Please keep the box closed and filament stored when not in use.

Slicing Software

CMS laptops are loaded with the latest version of Cura Lulzbot Edition.

Octoprint

Octoprint is available on the CMS internal network. Currently, it is the recommended method for accessing the Lulzbot Mini. There have been problems with the Taz 6 stopping a print when Octoprint connects, so it is not recommended you access it while the printer is actively printing. http://172.18.142.34or http://octopi-lulzbot-mini.sawtooth.claremontmakerspace.org/- Lulzbot Mini
http://172.18.142.42 or http://octopi-taz-6.sawtooth.claremontmakerspace.org/Lulzbot Taz 6

Again, please note that both of these links only work when you're on the Claremont Makerspace's network.

Printer Etiquette

Always choose the smallest printer that can fit your print.

As the printer area can be dusty, it is suggested you clean the printer bed prior to printing (a simple wipe with a paper towel and IPA (isopropyl alcohol) should suffice). If there are not paper towels and IPA in the print area, email the shop leads at [email protected]. If when removing your print you find it has left a residue, clean the bed. If you must remove another member's print, do so as carefully as possible, and place in the labeled bin. If you must switch filaments, make sure to place the filament in the humidity-controlled bin.