3D Printers: Difference between revisions

From Claremont MakerSpace
No edit summary
(Added a section on firmware.)
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{ToolInfo
{{ToolInfo
|common name=3D printer
| common name = 3D printer
|make=Aleph Objects
| make = Aleph Objects
|model=Lulzbot Mini
| model = Lulzbot Mini
|serial=KT-P0035NA-11067
| asset tag = CMS00011
|name=Lulzbot Mini
| name = Lulzbot Mini
|shop=Digital Fab. and Electronics Lab
| shop = Digital Fab. and Electronics Lab
|certification=Yes
| certification = 3D Printer Certification
|working=Yes
| manual = [[Media:Lulzbot Mini Quick Start Guide.pdf|Quick Start Guide]];[[Media:Lulzbot Mini User Manual.pdf|User Manual]]
|manual=[https://download.lulzbot.com/Mini/1.04/documentation/Quick_Start_Guide/Mini_1.04_Quick_Start_Guide_FINAL.pdf Quick Start Guide];[https://download.lulzbot.com/Mini/1.04/documentation/Manual/interior_9780989378468.pdf User Manual]}}
| reservation = https://claremontmakerspace.org/membersonly/scheduler/?cat_id=2&staff_id=11
}}


{{ToolInfo
{{ToolInfo
|common name=3D printer
| common name = 3D printer
|make=Aleph Objects
| make = Aleph Objects
|model=Lulzbot Taz 6
| model = Lulzbot Taz 6
|serial=KT-PR0041NA-25272
| asset tag = CMS00012
|name=Lulzbot Taz 6
| name = Lulzbot Taz 6
|shop=Digital Fab. and Electronics Lab
| shop = Digital Fab. and Electronics Lab
|certification=Yes
| certification = 3D Printer Certification
|working=No
| manual = [[Media:Lulzbot Taz 6 Quick Start Guide.pdf|Quick Start Guide]];[[Media:Lulzbot Taz 6 User Manual.pdf|User Manual]]
|manual=[https://download.lulzbot.com/TAZ/6.03/documentation/guide/PDFs_for_web/TAZ_6_QSG_OPERATION_WEB.pdf Quick Start Guide];[https://download.lulzbot.com/TAZ/6.03/documentation/manual/9780989378482_interior_r6.02.pdf User Manual]}}
| reservation = https://claremontmakerspace.org/membersonly/scheduler/?cat_id=2&staff_id=5
}}


The [[Digital Fab. and Electronics Lab]] hosts two 3D printers made by [https://www.lulzbot.com/ Lulzbot]. These are fused deposition modeling (FDM) printers, which means that they build the model by extruding plastic layer by layer.  
The [[Digital Fab. and Electronics Lab]] hosts two 3D printers made by [https://www.lulzbot.com/ Lulzbot]. These are fused deposition modeling (FDM) printers, which means that they build the model by extruding plastic layer by layer.  
==Shop Lead==
The shop lead for the 3D Printers can be contacted via the [https://tickets.claremontmakerspace.org/open.php online ticketing system]. [[3D Printers Shop Lead Duties]]


==Print Area==
==Print Area==
Line 34: Line 39:


==Slicing Software==
==Slicing Software==
CMS laptops are loaded with the latest version of [https://www.lulzbot.com/cura Cura Lulzbot Edition].  
CMS laptops are loaded with the latest version of [https://www.lulzbot.com/cura Cura Lulzbot Edition]. Note that this edition is specific to the Lulzbot printers. It is several versions behind the non-printer-specific version of Cura.  


==OctoPrint==
==OctoPrint==
[https://octoprint.org/ OctoPrint], a web interface for 3D printers, is available on the CMS internal network. Currently, it is the recommended method for accessing the Lulzbot Mini. There have been problems with the Taz 6 stopping a print when Octoprint connects, so it is not recommended you access it while the printer is actively printing (This only applies if the print was started from outside OctoPrint).
[https://octoprint.org/ OctoPrint], a web interface for 3D printers, is available on the CMS internal network. Currently, it is the recommended method for accessing the LulzBot 3D printers. It is not recommended you use the CONNECT function in OctoPrint if the printers are currently printing, as the print will stop. (This only applies if the print was started from outside OctoPrint.)


*Lulzbot Mini: http://172.18.142.34 or http://octopi-lulzbot-mini.sawtooth.claremontmakerspace.org/
*Lulzbot Mini: http://octopi-lulzbot-mini.sawtooth.claremontmakerspace.org/
*Lulzbot Taz 6: http://172.18.142.42 or http://octopi-taz-6.sawtooth.claremontmakerspace.org/
*Lulzbot Taz 6: http://octopi-taz-6.sawtooth.claremontmakerspace.org/


Again, please note that these links only work when you're on the Claremont MakerSpace's network.
Again, please note that these links only work when you're on the Claremont MakerSpace's network. When you are not, you can view the current status of the printers at https://3dprint.claremontmakerspace.org/.
 
== Firmware ==
The Taz 6 is Currently running 2.09.011 please note that this requires you to set the tool type (standard .5mm) at the printer. Z-offset is -01.11 and Steps/mm (e-steps) are 830.  


==Printer Etiquette==
==Printer Etiquette==
Line 48: Line 56:


As the printer area can be dusty, it is suggested you clean the printer bed prior to printing (a simple wipe with a paper towel and IPA (isopropyl alcohol) should suffice). If there are not paper towels and IPA in the print area, email the shop leads at [mailto:[email protected] [email protected]]. If when removing your print you find it has left a residue, clean the bed. If you must remove another member's print, do so as carefully as possible, and place in the labeled bin. If you must switch filaments, make sure to place the filament in the humidity-controlled bin.
As the printer area can be dusty, it is suggested you clean the printer bed prior to printing (a simple wipe with a paper towel and IPA (isopropyl alcohol) should suffice). If there are not paper towels and IPA in the print area, email the shop leads at [mailto:[email protected] [email protected]]. If when removing your print you find it has left a residue, clean the bed. If you must remove another member's print, do so as carefully as possible, and place in the labeled bin. If you must switch filaments, make sure to place the filament in the humidity-controlled bin.
==Certification==
Certification is available by contacting the shop lead via the [https://tickets.claremontmakerspace.org/open.php online ticketing system]. As part of the certification process, members will be required to print a [https://wiki.claremontmakerspace.org/images/6/60/CMS-bookmark.stl simple .stl file].

Revision as of 02:34, 11 March 2022

Lulzbot Mini
3D printer
Make Aleph Objects
Model Lulzbot Mini
Specs
Manual
Requires
Certification
3D Printer Certification
Allows
Reservation
Go To Scheduler
In Shop Digital Fab. and Electronics Lab
Instances
Asset Tag Status
CMS00011 Ready to Deploy
Lulzbot Taz 6
3D printer
Make Aleph Objects
Model Lulzbot Taz 6
Specs
Manual
Requires
Certification
3D Printer Certification
Allows
Reservation
Go To Scheduler
In Shop Digital Fab. and Electronics Lab
Instances
Asset Tag Status
CMS00012 Ready to Deploy

The Digital Fab. and Electronics Lab hosts two 3D printers made by Lulzbot. These are fused deposition modeling (FDM) printers, which means that they build the model by extruding plastic layer by layer.

Shop Lead

The shop lead for the 3D Printers can be contacted via the online ticketing system. 3D Printers Shop Lead Duties

Print Area

The Lulzbot Taz 6 maximum print volume is 28 0mm x 280 mm x 250 mm (11.02 in x 11.02 in x 9.8 in).
The Lulzbot Mini maximum print area is 152 mm x 152 mm x 158 mm (6 in x 6 in x 6.2 in).

Filament

Both printers use 2.85mm / 3mm filament. Capable materials are: ABS, PLA, HIPS, PVA, wood filled filaments, Polyester (Tritan), PETT, bronze and copper filled filaments, Polycarbonate, Nylon, PETG, conductive PLA and ABS, UV luminescent filaments, PCTPE, PC-ABS, Alloy 910. (Note: Printing with carbon fiber filaments is not recommended at this time because carbon fiber filaments can degrade both the nozzle and hot end of the LulzBot Mini Tool Head.) The Claremont Makerspace encourages the use of PLA as the odor is minimal. To print with something other than PLA please obtain shop lead approval prior to printing.

The CMS provides white, black, and grey filament for member projects in the humidity-controlled bin located between the two printers. The cost is .04 a gram (weight includes support material). You can weigh your part post-print on the scale and leave cash only in the lockbox under the Taz 6. There is some storage space for member filament in the humidity-controlled clear box. Clearly label your personal filament or it may get used. Please keep the box closed and filament stored when not in use.

Slicing Software

CMS laptops are loaded with the latest version of Cura Lulzbot Edition. Note that this edition is specific to the Lulzbot printers. It is several versions behind the non-printer-specific version of Cura.

OctoPrint

OctoPrint, a web interface for 3D printers, is available on the CMS internal network. Currently, it is the recommended method for accessing the LulzBot 3D printers. It is not recommended you use the CONNECT function in OctoPrint if the printers are currently printing, as the print will stop. (This only applies if the print was started from outside OctoPrint.)

Again, please note that these links only work when you're on the Claremont MakerSpace's network. When you are not, you can view the current status of the printers at https://3dprint.claremontmakerspace.org/.

Firmware

The Taz 6 is Currently running 2.09.011 please note that this requires you to set the tool type (standard .5mm) at the printer. Z-offset is -01.11 and Steps/mm (e-steps) are 830.

Printer Etiquette

Always choose the smallest printer that can fit your print.

As the printer area can be dusty, it is suggested you clean the printer bed prior to printing (a simple wipe with a paper towel and IPA (isopropyl alcohol) should suffice). If there are not paper towels and IPA in the print area, email the shop leads at [email protected]. If when removing your print you find it has left a residue, clean the bed. If you must remove another member's print, do so as carefully as possible, and place in the labeled bin. If you must switch filaments, make sure to place the filament in the humidity-controlled bin.

Certification

Certification is available by contacting the shop lead via the online ticketing system. As part of the certification process, members will be required to print a simple .stl file.