Band Saw Certification: Difference between revisions
From Claremont MakerSpace
(Add (most) current certification pages) |
("Add approval dates to certifications") |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Certification|version=0.1.0}} | {{Certification | ||
|version=0.1.0 | |||
|approvaldate=2020-11-03 | |||
}} | |||
== Tool Anatomy == | === Tool Anatomy === | ||
* Parts of the Band Saw are identified properly. | * Parts of the Band Saw are identified properly. | ||
| Line 8: | Line 11: | ||
** Blade guide | ** Blade guide | ||
** Blade guard lock | ** Blade guard lock | ||
** Stop & | ** Stop & Start buttons | ||
** Fence | ** Fence | ||
** Dust collection port and blast gate (on duct) | ** Dust collection port and blast gate (on duct) | ||
== Pre-Operation == | === Pre-Operation === | ||
* Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc. | * Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc. | ||
| Line 19: | Line 22: | ||
** The blade height is locked after adjustment | ** The blade height is locked after adjustment | ||
== Operation == | === Operation === | ||
* Dust collector is used properly | * Dust collector is used properly | ||
| Line 29: | Line 32: | ||
* Fence is used properly | * Fence is used properly | ||
== Post-Operation == | === Post-Operation === | ||
* Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed | * Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed | ||
* Push aids are returned to their proper locations | * Push aids are returned to their proper locations | ||
== Lockout/Tagout Procedure == | === Lockout/Tagout Procedure === | ||
* Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified. | * Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified. | ||
{{CertificationSignOff}} | {{CertificationSignOff}} | ||
Latest revision as of 21:32, 3 November 2020
| Band Saw Certification | |
|---|---|
| Version | 0.1.0 |
| Approval Date | 2020-11-03 |
| Prerequisites | |
| Document/Printout | Band Saw Certification |
| Required For Tools/Shops | |
| Student: | |
|---|---|
| Trainer: | |
| Date: | |
| Version: | 0.1.0 - 2020-11-03 |
Certification required for: Band Saw (Wood Shop), Ryobi 9 in. Band Saw (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Parts of the Band Saw are identified properly.
- Blade guard height adjuster
- Blade guard
- Blade guide
- Blade guard lock
- Stop & Start buttons
- Fence
- Dust collection port and blast gate (on duct)
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
- Stock is checked for issues/problems
- Blade guard height is adjusted to proper level for the job at hand
- The blade height is locked after adjustment
Operation
- Dust collector is used properly
- Proper body position
- Proper push aid(s) are used
- Student conducts curved cut properly
- Student conducts straight cut properly
- Miter gauge is used properly
- Fence is used properly
Post-Operation
- Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed
- Push aids are returned to their proper locations
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified.
| Pass/Fail: |
|---|
| Comments: |
|---|
| Student Signature: | Date | ||
|---|---|---|---|
| Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).
