Laser Cutter: Difference between revisions
From Claremont MakerSpace
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
== Material Settings == | == Material Settings == | ||
{|class="wikitable" | {|class="wikitable" | ||
! Material Name !! Power !! Speed !! Passes !! Air? !! Notes | ! Material Name !! Cut/Engrave !! Power !! Speed !! Passes !! Air? !! Notes | ||
|- | |- | ||
| Polyester Interfacing || 50 || 100 || 2 || Yes || Burned a bit, and still needed to be torn out (but this did not damage it) -[[User:Adam.goldsmith|Adam.goldsmith]] ([[User talk:Adam.goldsmith|talk]]) | | Polyester Interfacing || Cut || 50 || 100 || 2 || Yes || Burned a bit, and still needed to be torn out (but this did not damage it) -[[User:Adam.goldsmith|Adam.goldsmith]] ([[User talk:Adam.goldsmith|talk]]) | ||
|- | |- | ||
| 80 Lb. Drawing Paper Medium Surface || 30 || 35 || 1 || No || Burned very slightly on back of paper. | | 80 Lb. Drawing Paper Medium Surface || Cut || 30 || 35 || 1 || No || Burned very slightly on back of paper. | ||
-[[User:Don.Fitzpatrick|Don.Fitzpatrick]] ([[User talk:Don.Fitzpatrick|talk]]) | -[[User:Don.Fitzpatrick|Don.Fitzpatrick]] ([[User talk:Don.Fitzpatrick|talk]]) | ||
|} | |} | ||
Revision as of 15:50, 2 July 2018
This section has been marked as STUB.
autogenerated, remove when more detail added
| Laser Cutter | |
|---|---|
| Make | GCC LaserPro |
| Model | GLS Hybrid-80Ti |
| Specs | |
| Manual | |
| Requires Certification |
Unknown |
| In Shop | Digital Fab. and Electronics Lab |
Material Settings
| Material Name | Cut/Engrave | Power | Speed | Passes | Air? | Notes |
|---|---|---|---|---|---|---|
| Polyester Interfacing | Cut | 50 | 100 | 2 | Yes | Burned a bit, and still needed to be torn out (but this did not damage it) -Adam.goldsmith (talk) |
| 80 Lb. Drawing Paper Medium Surface | Cut | 30 | 35 | 1 | No | Burned very slightly on back of paper. |
