Laser Cutter: Difference between revisions
From Claremont MakerSpace
No edit summary |
No edit summary |
||
Line 16: | Line 16: | ||
| Polyester Interfacing || Cut || 50 || 100 || 2 || Yes || Burned a bit, and still needed to be torn out (but this did not damage it) -[[User:Adam.goldsmith|Adam.goldsmith]] ([[User talk:Adam.goldsmith|talk]]) | | Polyester Interfacing || Cut || 50 || 100 || 2 || Yes || Burned a bit, and still needed to be torn out (but this did not damage it) -[[User:Adam.goldsmith|Adam.goldsmith]] ([[User talk:Adam.goldsmith|talk]]) | ||
|- | |- | ||
| 80 Lb. Drawing Paper Medium Surface || Cut || 30 || 35 || 1 || No || Burned very slightly on back of paper. | | 80 Lb. Drawing Paper Medium Surface || Cut || 30 || 35 || 1 || No || Burned very slightly on back of paper. -[[User:Don.Fitzpatrick|Don.Fitzpatrick]] ([[User talk:Don.Fitzpatrick|talk]]) | ||
-[[User:Don.Fitzpatrick|Don.Fitzpatrick]] ([[User talk:Don.Fitzpatrick|talk]]) | |||
|} | |} |
Revision as of 15:50, 2 July 2018
This section has been marked as STUB.
autogenerated, remove when more detail added
Laser Cutter | |
---|---|
Make | GCC LaserPro |
Model | GLS Hybrid-80Ti |
Specs | |
Manual | |
Requires Certification |
Unknown |
In Shop | Digital Fab. and Electronics Lab |
Material Settings
Material Name | Cut/Engrave | Power | Speed | Passes | Air? | Notes |
---|---|---|---|---|---|---|
Polyester Interfacing | Cut | 50 | 100 | 2 | Yes | Burned a bit, and still needed to be torn out (but this did not damage it) -Adam.goldsmith (talk) |
80 Lb. Drawing Paper Medium Surface | Cut | 30 | 35 | 1 | No | Burned very slightly on back of paper. -Don.Fitzpatrick (talk) |