Laser Cutter: Difference between revisions
From Claremont MakerSpace
No edit summary |
No edit summary |
||
Line 11: | Line 11: | ||
== Material Settings == | == Material Settings == | ||
{|class="wikitable" | {|class="wikitable sortable" | ||
! Material Name !! Cut/Engrave !! Power !! Speed !! Passes !! Air? !! Notes | ! Material Name !! Cut/Engrave !! Power !! Speed !! Passes !! Air? !! Notes | ||
|- | |- |
Revision as of 15:52, 2 July 2018
This section has been marked as STUB.
autogenerated, remove when more detail added
Laser Cutter | |
---|---|
Make | GCC LaserPro |
Model | GLS Hybrid-80Ti |
Specs | |
Manual | |
Requires Certification |
Unknown |
In Shop | Digital Fab. and Electronics Lab |
Material Settings
Material Name | Cut/Engrave | Power | Speed | Passes | Air? | Notes |
---|---|---|---|---|---|---|
Polyester Interfacing | Cut | 50 | 100 | 2 | Yes | Burned a bit, and still needed to be torn out (but this did not damage it) -Adam.goldsmith (talk) |
80 Lb. Drawing Paper Medium Surface | Cut | 30 | 35 | 1 | No | Burned very slightly on back of paper. -Don.Fitzpatrick (talk) |