View source for Laser Lens and Mirror Cleaning Certification

{{Certification
  |version=1.0.0
  |approvaldate=2022-10-28
  |prerequisites=[[Laser Cutter Certification]]
}}

Please note that the person to-be-certified needs have a completed [[Laser Cutter Certification]] on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics.

=== When to Clean ===
*Before cutting
*After cutting (if high usage / dirty materials cut)
*During cutting (if high usage / noticeable decrease in power)
*Location of supplies

=== Equipment ===
*Location of locker key
*Location of supplies
*Care of supplies
**Not contaminating wipes and swabs
**Proper disposal
*Part identification
**Mirror (2x)
**Lens
**Nozzle

=== Proper Part Disassembly / Reassembly ===
* Mirrors (2x)
* Lens
* Lens cover / knobs
* Nozzle

=== Cleaning Process ===
* Mirror - only lens paper / lens cleaner
* Lens - swab and/or lens paper / lens cleaner
* Nozzle - paper towel / Simple Green
* Housing - paper towel / Simple Green

=== Troubleshooting ===
* Who to contact [mailto:electronics@claremontmakerspace.org electronics@claremontmakerspace.org]
* Tag out process
* Missing / low supplies
* Damage discovery

{{CertificationSignOff}}