Laser Lens and Mirror Cleaning Certification: Difference between revisions

From Claremont MakerSpace
VisualWikitext
(Add approval date)
(Created page with "{{Certification|version=0.1.0|approvaldate=2020-11-05}} Please note that the person to-be-certified needs have a completed laser cutter certification on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics. === Equipment === *Location of locker key *Location of supplies *Care of supplies **Not contaminating wipes and swabs **Proper disp...")
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Certification
{{Certification|version=0.1.0|approvaldate=2020-11-05}}
  |version=1.0.0
  |approvaldate=2022-10-28
  |prerequisites=[[Laser Cutter Certification]]
}}


Please note that the person to-be-certified needs have a completed [[Laser Cutter Certification]] on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics.
Please note that the person to-be-certified needs have a completed laser cutter certification on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics.
 
=== When to Clean ===
*Before cutting
*After cutting (if high usage / dirty materials cut)
*During cutting (if high usage / noticeable decrease in power)
*Location of supplies


=== Equipment ===
=== Equipment ===

Revision as of 19:47, 21 September 2022

Laser Lens and Mirror Cleaning Certification
Version 0.1.0
Approval Date 2020-11-05
Prerequisites
Document/Printout Laser Lens and Mirror Cleaning Certification
Optional For Tools/Shops

Student:
Trainer:
Date:
Version: 0.1.0 - 2020-11-05


Certification optional for: Laser Cutter (Digital Fab. and Electronics Lab)

DO NOT USE THIS PAGE AS A SIGN OFF SHEET

Please print the document from the download link in the top right of the wiki page instead!

Training Check-Off List:

Please note that the person to-be-certified needs have a completed laser cutter certification on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics.

Equipment

  • Location of locker key
  • Location of supplies
  • Care of supplies
    • Not contaminating wipes and swabs
    • Proper disposal
  • Part identification
    • Mirror (2x)
    • Lens
    • Nozzle

Proper Part Disassembly / Reassembly

  • Mirrors (2x)
  • Lens
  • Lens cover / knobs
  • Nozzle

Cleaning Process

  • Mirror - only lens paper / lens cleaner
  • Lens - swab and/or lens paper / lens cleaner
  • Nozzle - paper towel / Simple Green
  • Housing - paper towel / Simple Green

Troubleshooting

Pass/Fail:
Comments:
Student Signature: Date
Certifier Signature: Date

Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.

Then, return this form to the front desk (even if the student failed!).

Retrieved from "https://wiki.claremontmakerspace.org/index.php?title=Laser_Lens_and_Mirror_Cleaning_Certification&oldid=1003"