Laser Lens and Mirror Cleaning Certification: Difference between revisions
(Add approval date) |
(Link Laser Cutter Certification as prerequisite) |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
{{Certification | {{Certification|version=0.1.0|prerequisites=[[Laser Cutter Certification]]}} | ||
}} | |||
Please note that the person to-be-certified needs have a completed [[Laser Cutter Certification]] on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics. | Please note that the person to-be-certified needs have a completed [[Laser Cutter Certification]] on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics. | ||
=== Equipment === | === Equipment === |
Revision as of 20:37, 21 September 2022
Laser Lens and Mirror Cleaning Certification | |
---|---|
Version | 0.1.0 |
Approval Date | Draft/NOT APPROVED |
Prerequisites | |
Document/Printout | Laser Lens and Mirror Cleaning Certification |
Optional For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 0.1.0 - Draft/NOT APPROVED: DO NOT USE |
Prerequisite Certifications: Laser Cutter Certification
Certification optional for: Laser Cutter (Digital Fab. and Electronics Lab)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Please note that the person to-be-certified needs have a completed Laser Cutter Certification on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics.
Equipment
- Location of locker key
- Location of supplies
- Care of supplies
- Not contaminating wipes and swabs
- Proper disposal
- Part identification
- Mirror (2x)
- Lens
- Nozzle
Proper Part Disassembly / Reassembly
- Mirrors (2x)
- Lens
- Lens cover / knobs
- Nozzle
Cleaning Process
- Mirror - only lens paper / lens cleaner
- Lens - swab and/or lens paper / lens cleaner
- Nozzle - paper towel / Simple Green
- Housing - paper towel / Simple Green
Troubleshooting
- Who to contact [email protected]
- Tag out process
- Missing / low supplies
- Damage discovery
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).