Laser Lens and Mirror Cleaning Certification

Laser Lens and Mirror Cleaning Certification
Version	1.0.0
Approval Date	2022-10-28
Prerequisites	Laser Cutter Certification
Document/Printout	Laser Lens and Mirror Cleaning Certification
Optional For Tools/Shops	Laser Cutter

Student:
Trainer:
Date:
Version:	1.0.0 - 2022-10-28

Prerequisite Certifications: Laser Cutter Certification

Certification optional for: Laser Cutter (Digital Fab. and Electronics Lab)

DO NOT USE THIS PAGE AS A SIGN OFF SHEET

Please print the document from the download link in the top right of the wiki page instead!

Training Check-Off List:

Please note that the person to-be-certified needs have a completed Laser Cutter Certification on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics.

When to Clean

• Before cutting
• After cutting (if high usage / dirty materials cut)
• During cutting (if high usage / noticeable decrease in power)
• Location of supplies

Equipment

• Location of locker key
• Location of supplies
• Care of supplies
  • Not contaminating wipes and swabs
  • Proper disposal
• Part identification
  • Mirror (2x)
  • Lens
  • Nozzle

Proper Part Disassembly / Reassembly

• Mirrors (2x)
• Lens
• Lens cover / knobs
• Nozzle

Cleaning Process

• Mirror - only lens paper / lens cleaner
• Lens - swab and/or lens paper / lens cleaner
• Nozzle - paper towel / Simple Green
• Housing - paper towel / Simple Green

Troubleshooting

• Who to contact [email protected]
• Tag out process
• Missing / low supplies
• Damage discovery

Pass/Fail:

Comments:

Student Signature:		Date
Certifier Signature:		Date

Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.

Then, return this form to the front desk (even if the student failed!).