Laser Lens and Mirror Cleaning Certification
From Claremont MakerSpace
Revision as of 19:47, 21 September 2022 by Tiffany.vincent (talk | contribs) (Created page with "{{Certification|version=0.1.0|approvaldate=2020-11-05}} Please note that the person to-be-certified needs have a completed laser cutter certification on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics. === Equipment === *Location of locker key *Location of supplies *Care of supplies **Not contaminating wipes and swabs **Proper disp...")
Laser Lens and Mirror Cleaning Certification | |
---|---|
Version | 0.1.0 |
Approval Date | 2020-11-05 |
Prerequisites | |
Document/Printout | Laser Lens and Mirror Cleaning Certification |
Optional For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 0.1.0 - 2020-11-05 |
Certification optional for: Laser Cutter (Digital Fab. and Electronics Lab)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Please note that the person to-be-certified needs have a completed laser cutter certification on file and is not allowed to have this list during certification. After successfully demonstrating knowledge in these areas, a member will be certified and can clean the laser cutter optics.
Equipment
- Location of locker key
- Location of supplies
- Care of supplies
- Not contaminating wipes and swabs
- Proper disposal
- Part identification
- Mirror (2x)
- Lens
- Nozzle
Proper Part Disassembly / Reassembly
- Mirrors (2x)
- Lens
- Lens cover / knobs
- Nozzle
Cleaning Process
- Mirror - only lens paper / lens cleaner
- Lens - swab and/or lens paper / lens cleaner
- Nozzle - paper towel / Simple Green
- Housing - paper towel / Simple Green
Troubleshooting
- Who to contact [email protected]
- Tag out process
- Missing / low supplies
- Damage discovery
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).