Difference between revisions of "Metal Band Saw Certification"

From Claremont MakerSpace
m
(Add approval date)
 
Line 1: Line 1:
{{Certification
{{Certification
   |version=0.1.0
   |version=0.1.0
  |approvaldate=2021-08-05
}}
}}



Latest revision as of 20:10, 5 August 2021

Metal Band Saw Certification
Version 0.1.0
Approval Date 2021-08-05
Prerequisites
Document/Printout Download (old versions)
For Tools/Shops

Training Check-Off List:

Tool Anatomy

  • Parts of the Band Saw are identified properly.
    • Blade guard height adjuster
    • Blade guard
    • Blade guide
    • Blade guard lock
    • Stop & Start buttons
    • Blade width, thickness, and pitch

Pre-Operation

  • Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
  • Stock is checked for issues/problems
  • Blade guard height is adjusted to proper level for the job at hand
    • The blade height is locked after adjustment
  • Proper blade is selected for metal being cut
  • Proper saw speed set for metal being cut

Operation

  • Bar or tubing properly attached to prevent saw from rotating material
    • At least 3 blade teeth engaged with material to avoid shocking the blade
  • Proper body position
  • Proper push aid(s) are used
  • Student conducts curved cut properly
  • Student conducts straight cut properly
  • Miter gauge is used properly

Post-Operation

  • Work area is cleaned - scraps go to metal scrap bin and work area is swept or vacuumed
  • Push aids are returned to their proper locations

Lockout/Tagout Procedure

  • Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified.