Mid-Arm Quilting Machine Certification: Difference between revisions

From Claremont MakerSpace
(Bump minor version for change in name/tool name)
 
Line 1: Line 1:
{{Certification
{{Certification
   |version=0.1.1
   |version=0.1.2
   |prerequisites=Fiber Arts Orientation Certification
   |prerequisites=Fiber Arts Orientation Certification
   |approvaldate=2020-11-03
   |approvaldate=2020-11-03

Latest revision as of 20:09, 2 October 2021

Mid-Arm Quilting Machine Certification
Version 0.1.2
Approval Date 2020-11-03
Prerequisites
Fiber Arts Orientation Certification
Document/Printout Mid-Arm Quilting Machine Certification
Required For Tools/Shops

Training Check-Off List:

Tool Anatomy:

  • Needle, threading, bobbin

Pre-Operation:

Needle

  • Student properly changes a needle
  • Student selects proper needle size for specific application
  • Student orients scarf correctly

Threading

  • Correct thread path is followed
  • Student adjusts tension by small increments if needed
  • Student checks spring

Bobbin

  • Bobbin winding performed correctly
  • Case is inspected
  • Oiling performed properly
  • Bobbin is installed properly

Loading

  • Clamp Sequence performed correctly
  • Clamp Alignment performed correctly

Operation:

Post-Operation:

  • Clean up area, remove any unused material
  • Return machine to original state

Lockout/Tagout Procedure

  • Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified