Panel Saw Certification: Difference between revisions
From Claremont MakerSpace
("Add approval dates to certifications") |
("Fix some whitespace and headers in certs") |
||
| Line 4: | Line 4: | ||
}} | }} | ||
Tool Anatomy | === Tool Anatomy === | ||
* Parts of the Panel Saw are identified properly. | * Parts of the Panel Saw are identified properly. | ||
Latest revision as of 21:32, 3 November 2020
| Panel Saw Certification | |
|---|---|
| Version | 0.1.0 |
| Approval Date | 2020-11-03 |
| Prerequisites | |
| Document/Printout | Panel Saw Certification |
| Required For Tools/Shops | |
| Student: | |
|---|---|
| Trainer: | |
| Date: | |
| Version: | 0.1.0 - 2020-11-03 |
Certification required for: Panel Saw (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Parts of the Panel Saw are identified properly.
- Carriage
- Saw Motor
- Rollers
- Guide tubes
- ON/OFF switch
- Indexing pins
- Feed Stock label
- Carriage lock
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
Operation
- Vertical cut is performed properly
- Horizontal cut is performed properly
Post-Operation
- Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, ,barrel covers and locks, tag filled out and posted, front desk notified.
| Pass/Fail: |
|---|
| Comments: |
|---|
| Student Signature: | Date | ||
|---|---|---|---|
| Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).
