Panel Saw Certification

From Claremont MakerSpace
Revision as of 21:32, 3 November 2020 by Adam.goldsmith (talk | contribs) ("Add approval dates to certifications")

Panel Saw Certification
Version 0.1.0
Approval Date 2020-11-03
Prerequisites
Document/Printout Panel Saw Certification
Required For Tools/Shops

Training Check-Off List:

Tool Anatomy

  • Parts of the Panel Saw are identified properly.
    • Carriage
    • Saw Motor
    • Rollers
    • Guide tubes
    • ON/OFF switch
    • Indexing pins
    • Feed Stock label
    • Carriage lock

Pre-Operation

  • Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.

Operation

  • Vertical cut is performed properly
  • Horizontal cut is performed properly

Post-Operation

  • Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed

Lockout/Tagout Procedure

  • Tool unplugged and plug wrapped in safe/visible location, ,barrel covers and locks, tag filled out and posted, front desk notified.