Planer Certification

From Claremont MakerSpace
Revision as of 22:48, 7 October 2022 by Adam.goldsmith (talk | contribs) (Bump patch version for name change)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Planer Certification
Version 0.1.1
Approval Date 2020-11-03
Document/Printout Planer Certification
Required For Tools/Shops

Training Check-Off List:

Tool Anatomy

  • Parts of the planer are properly identified


  • Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
  • Stock is checked for issues/problems
  • Supports or trained assistants are available to help with outfeed if necessary


  • Dust collector is used properly
  • Proper body position
  • Table is adjusted properly
  • Material is fed properly
  • Understand the cutting depth limit as per the manufacturer (1/32" per pass)


  • Work area is cleaned

Lockout/Tagout Procedure

  • Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified.