Scroll Saw Certification: Difference between revisions
From Claremont MakerSpace
(Created page with "{{Certification | version=1.0.0 }} === Tool Anatomy === Parts of the Scroll Saw are identified properly. * Blade mountings * Blade guard * Blade tension control * On-off switch * Variable speed control * Table tilt mechanism === Pre-Operation === * Pre-Operation Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc. * Stock is checked for issues/problems * Select proper scroll saw blade for type and thickness of material * Scroll...") |
(Add approval date) |
||
Line 1: | Line 1: | ||
{{Certification | {{Certification | ||
| version=1.0.0 | | version=1.0.0 | ||
| approvaldate=2022-11-16 | |||
}} | }} | ||
Latest revision as of 23:53, 16 November 2022
Scroll Saw Certification | |
---|---|
Version | 1.0.0 |
Approval Date | 2022-11-16 |
Prerequisites | |
Document/Printout | Scroll Saw Certification |
Required For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 1.0.0 - 2022-11-16 |
Certification required for: Scroll Saw (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
Parts of the Scroll Saw are identified properly.
- Blade mountings
- Blade guard
- Blade tension control
- On-off switch
- Variable speed control
- Table tilt mechanism
Pre-Operation
- Pre-Operation Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
- Stock is checked for issues/problems
- Select proper scroll saw blade for type and thickness of material
- Scroll saw blade is properly installed and tensioned
- Blade guard is in the proper position
Operation
- Proper body position
- Proper push aid(s) are used
- Blade speed adjusted for proper operation
- Student conducts straight cut properly
- Student conducts curved cut properly
- Student conducts bevel cut properly
Post-Operation
- Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed
Lockout/Tagout Procedure
Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified.
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).