Mid-Arm Quilting Machine Certification
From Claremont MakerSpace
(Redirected from Quilting Machine Certification)
This is the approved revision of this page, as well as being the most recent.
This is the approved revision of this page, as well as being the most recent.
Mid-Arm Quilting Machine Certification | |
---|---|
Version | 0.1.2 |
Approval Date | 2020-11-03 |
Prerequisites | Fiber Arts Orientation Certification
|
Document/Printout | Mid-Arm Quilting Machine Certification |
Required For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 0.1.2 - 2020-11-03 |
Prerequisite Certifications: Fiber Arts Orientation Certification
Certification required for: Mid-Arm Quilting Machine (Fiber Arts Studio)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy:
- Needle, threading, bobbin
Pre-Operation:
Needle
- Student properly changes a needle
- Student selects proper needle size for specific application
- Student orients scarf correctly
Threading
- Correct thread path is followed
- Student adjusts tension by small increments if needed
- Student checks spring
Bobbin
- Bobbin winding performed correctly
- Case is inspected
- Oiling performed properly
- Bobbin is installed properly
Loading
- Clamp Sequence performed correctly
- Clamp Alignment performed correctly
Operation:
Post-Operation:
- Clean up area, remove any unused material
- Return machine to original state
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).