Miter Saw Certification: Difference between revisions
From Claremont MakerSpace
(Add (most) current certification pages) |
(Increase all header levels in certifications by one) |
||
Line 1: | Line 1: | ||
{{Certification|version=0.1.0}} | {{Certification|version=0.1.0}} | ||
== Tool Anatomy == | === Tool Anatomy === | ||
* Parts of the Miter Saw are identified properly. | * Parts of the Miter Saw are identified properly. | ||
Line 13: | Line 13: | ||
** Miter lock level | ** Miter lock level | ||
== Pre-Operation == | === Pre-Operation === | ||
* Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc. | * Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc. | ||
* Extension supports are adjusted properly | * Extension supports are adjusted properly | ||
== Operation == | === Operation === | ||
* Dust collector is used properly | * Dust collector is used properly | ||
Line 27: | Line 27: | ||
* Bevel cut is performed properly | * Bevel cut is performed properly | ||
== Post-Operation == | === Post-Operation === | ||
* Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed | * Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed | ||
== Lockout/Tagout Procedure == | === Lockout/Tagout Procedure === | ||
* Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified. | * Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified. | ||
{{CertificationSignOff}} | {{CertificationSignOff}} |
Revision as of 16:50, 25 August 2020
Miter Saw Certification | |
---|---|
Version | 0.1.0 |
Approval Date | Draft/NOT APPROVED |
Prerequisites | |
Document/Printout | Miter Saw Certification |
Required For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 0.1.0 - Draft/NOT APPROVED: DO NOT USE |
Certification required for: Miter Saw (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Parts of the Miter Saw are identified properly.
- Miter table
- Fence
- Work clamp
- Slide lock knob
- Trigger switch
- LED light switch
- Bevel Lock Lever
- Miter lock level
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
- Extension supports are adjusted properly
Operation
- Dust collector is used properly
- Proper body position
- Work is clamped properly
- Straight cut is performed properly
- Miter cut is performed properly
- Bevel cut is performed properly
Post-Operation
- Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified.
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).