Panel Saw Certification: Difference between revisions
From Claremont MakerSpace
(Add (most) current certification pages) |
(Increase all header levels in certifications by one) |
||
Line 13: | Line 13: | ||
** Carriage lock | ** Carriage lock | ||
== Pre-Operation == | === Pre-Operation === | ||
* Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc. | * Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc. | ||
== Operation == | === Operation === | ||
* Vertical cut is performed properly | * Vertical cut is performed properly | ||
* Horizontal cut is performed properly | * Horizontal cut is performed properly | ||
== Post-Operation == | === Post-Operation === | ||
* Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed | * Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed | ||
== Lockout/Tagout Procedure == | === Lockout/Tagout Procedure === | ||
* Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified. | * Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified. | ||
{{CertificationSignOff}} | {{CertificationSignOff}} |
Revision as of 16:50, 25 August 2020
Panel Saw Certification | |
---|---|
Version | 0.1.0 |
Approval Date | Draft/NOT APPROVED |
Prerequisites | |
Document/Printout | Panel Saw Certification |
Required For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 0.1.0 - Draft/NOT APPROVED: DO NOT USE |
Certification required for: Panel Saw (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Parts of the Panel Saw are identified properly.
- Carriage
- Saw Motor
- Rollers
- Guide tubes
- ON/OFF switch
- Indexing pins
- Feed Stock label
- Carriage lock
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
Operation
- Vertical cut is performed properly
- Horizontal cut is performed properly
Post-Operation
- Work area is cleaned - scraps go to scrap bin and work area is swept or vacuumed
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified.
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).