Planer Certification
From Claremont MakerSpace
Revision as of 16:49, 25 August 2020 by Adam.goldsmith (talk | contribs) (Increase all header levels in certifications by one)
Planer Certification | |
---|---|
Version | 0.1.0 |
Approval Date | Draft/NOT APPROVED |
Prerequisites | |
Document/Printout | Planer Certification |
Required For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 0.1.0 - Draft/NOT APPROVED: DO NOT USE |
Certification required for: Grizzly 20" Planer (Wood Shop), Powermatic 20" Planer (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Parts of the planer are properly identified
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
- Stock is checked for issues/problems
- Supports or trained assistants are available to help with outfeed if necessary
Operation
- Dust collector is used properly
- Proper body position
- Table is adjusted properly
- Material is fed properly
Post-Operation
- Work area is cleaned
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified.
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).