SawStop Table Saw Certification: Difference between revisions
From Claremont MakerSpace
(Increase all header levels in certifications by one) |
("Update certifications from Google Docs") |
||
| Line 11: | Line 11: | ||
* Correct blade is chosen for specific job/cut | * Correct blade is chosen for specific job/cut | ||
** Blade is changed correctly | ** Blade is changed correctly | ||
** SawStop brake is adjusted correctly | ** SawStop brake is adjusted correctly, if needed | ||
* Saw blade is adjusted properly (height and angle) | * Saw blade is adjusted properly (height and angle) | ||
* Proper push aids are identified and available | * Proper push aids are identified and available | ||
| Line 31: | Line 31: | ||
=== Lockout/Tagout Procedure === | === Lockout/Tagout Procedure === | ||
* Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified | * Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified | ||
{{CertificationSignOff}} | {{CertificationSignOff}} | ||
Revision as of 20:36, 23 October 2020
| SawStop Table Saw Certification | |
|---|---|
| Version | 0.1.0 |
| Approval Date | Draft/NOT APPROVED |
| Prerequisites | |
| Document/Printout | SawStop Table Saw Certification |
| Required For Tools/Shops | |
| Student: | |
|---|---|
| Trainer: | |
| Date: | |
| Version: | 0.1.0 - Draft/NOT APPROVED: DO NOT USE |
Certification required for: Table Saw (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Parts of the SawStop table saw are properly identified
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc.
- Stock is checked for issues/problems
- Correct blade is chosen for specific job/cut
- Blade is changed correctly
- SawStop brake is adjusted correctly, if needed
- Saw blade is adjusted properly (height and angle)
- Proper push aids are identified and available
Operation
- Dust collector is used properly
- Proper body position
- Straight ripping and cross cutting done properly & push aids used properly
- Angled ripping and cross cutting done properly & push aids used properly
- Miter gauge is used properly
- Feather board is used properly
Post-Operation
- Work area is cleaned
- Push aids, feather board and other accessories are returned to their proper locations
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified
| Pass/Fail: |
|---|
| Comments: |
|---|
| Student Signature: | Date | ||
|---|---|---|---|
| Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).
