ShopBot: Difference between revisions
From Claremont MakerSpace
No edit summary |
(Add link to docs page) |
||
| Line 7: | Line 7: | ||
|specs=[http://www.shopbottools.com/mProducts/Brochures/ShopBot_specSheet_FullSize.pdf Spec Sheet] | |specs=[http://www.shopbottools.com/mProducts/Brochures/ShopBot_specSheet_FullSize.pdf Spec Sheet] | ||
|manual=[http://www.shopbottools.com/ShopBotDocs/files/SBG%2000142%20User%20Guide%2020150317.pdf User Guide] | |manual=[http://www.shopbottools.com/ShopBotDocs/files/SBG%2000142%20User%20Guide%2020150317.pdf User Guide] | ||
[https://www.shopbottools.com/support/documentation/gantry Documentation Page] | |||
|shop=Wood Shop | |shop=Wood Shop | ||
|working=Yes | |||
|certification=Yes | |||
}} | }} | ||
The ShopBot is a Gantry CNC machine that can cut materials up to 4x8 feet in size and up to 6 inches in thickness. It is primarily good at cutting woods, including plywood and MDF. It can also V-carve (like signs) and drill. | The ShopBot is a Gantry CNC machine that can cut materials up to 4x8 feet in size and up to 6 inches in thickness. It is primarily good at cutting woods, including plywood and MDF. It can also V-carve (like signs) and drill. | ||
== Bits/Tooling == | == Bits/Tooling == | ||
Revision as of 22:07, 26 April 2020
This section has been marked as STUB.
| ShopBot PRS Standard | |
|---|---|
| Gantry CNC Router | |
| Make | ShopBot |
| Model | PRSstandard 96-48-8, w/2.2hp Spindle |
| Specs | |
| Manual | |
| Requires Certification |
Yes |
| In Shop | Wood Shop |
The ShopBot is a Gantry CNC machine that can cut materials up to 4x8 feet in size and up to 6 inches in thickness. It is primarily good at cutting woods, including plywood and MDF. It can also V-carve (like signs) and drill.
