Spindle Sander Certification: Difference between revisions
From Claremont MakerSpace
(Increase all header levels in certifications by one) |
("Update certifications from Google Docs") |
||
Line 30: | Line 30: | ||
=== Lockout/Tagout Procedure === | === Lockout/Tagout Procedure === | ||
* Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, front desk notified | * Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified | ||
{{CertificationSignOff}} | {{CertificationSignOff}} |
Revision as of 20:36, 23 October 2020
Spindle Sander Certification | |
---|---|
Version | 0.1.0 |
Approval Date | Draft/NOT APPROVED |
Prerequisites | |
Document/Printout | Spindle Sander Certification |
Required For Tools/Shops |
Student: | |
---|---|
Trainer: | |
Date: | |
Version: | 0.1.0 - Draft/NOT APPROVED: DO NOT USE |
Certification required for: Spindle Sander (Wood Shop), Wood River Oscillating Spindle Sander (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Mitre Guide
- Sanding Drum
- On/Off Switch
- Sanding Table
- Belt Attachment
Pre-Operation
- Safety precautions are followed - safety glasses, proper clothing, work area cleared, etc
- Dust collector is used properly
- Demonstrates safe sanding procedures on a small piece of lumber that has an arc.
Operation
- Demonstrates proper usage of abrasive belt cleaning block. (Big Eraser)
Post-Operation
- Work area is cleaned
Allowable Materials
- Can name all the materials that can be sanded on wood shop sanders
- Can state the 3 requirements of wood that is sanded on wood shop sanders
Lockout/Tagout Procedure
- Tool unplugged and plug wrapped in safe/visible location, barrel covers and locks, tag filled out and posted, front desk notified
Pass/Fail: |
---|
Comments: |
---|
Student Signature: | Date | ||
---|---|---|---|
Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).