Wood Lathe Certification: Difference between revisions
From Claremont MakerSpace
(Add (most) current certification pages) |
(Increase all header levels in certifications by one) |
||
| Line 1: | Line 1: | ||
{{Certification|prerequisites=Band Saw|version=0.1.0}} | {{Certification|prerequisites=Band Saw|version=0.1.0}} | ||
== Tool Anatomy == | === Tool Anatomy === | ||
* Tool rest | * Tool rest | ||
| Line 18: | Line 18: | ||
* tool rest locks | * tool rest locks | ||
== Pre-Operation == | === Pre-Operation === | ||
* Examine a blank for cracked or loose bark or loose wood. | * Examine a blank for cracked or loose bark or loose wood. | ||
| Line 24: | Line 24: | ||
* Secure or remove loose clothing that might get entangled with the work piece. | * Secure or remove loose clothing that might get entangled with the work piece. | ||
== Operation == | === Operation === | ||
* Properly chucking a blank between centers using a drive spur. | * Properly chucking a blank between centers using a drive spur. | ||
| Line 35: | Line 35: | ||
* Turner demonstrates the appropriate use of the scraper to do a shear scrape. | * Turner demonstrates the appropriate use of the scraper to do a shear scrape. | ||
== Tool Sharpening == | === Tool Sharpening === | ||
* Turner sets the jig properly and sharpens a swept back gouge. | * Turner sets the jig properly and sharpens a swept back gouge. | ||
* Turner sets the jig properly and sharpens a scraper. | * Turner sets the jig properly and sharpens a scraper. | ||
== Post-Operation == | === Post-Operation === | ||
* Work area is cleaned with Shop Vac or broom | * Work area is cleaned with Shop Vac or broom | ||
* All tools are returned to their proper places | * All tools are returned to their proper places | ||
== Lockout/Tagout Procedure == | === Lockout/Tagout Procedure === | ||
* Student imparts lockout/tagout procedure: Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, notify front desk (if on site) and email Woodshop Lead immediately. | * Student imparts lockout/tagout procedure: Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, notify front desk (if on site) and email Woodshop Lead immediately. | ||
{{CertificationSignOff}} | {{CertificationSignOff}} | ||
Revision as of 16:50, 25 August 2020
| Wood Lathe Certification | |
|---|---|
| Version | 0.1.0 |
| Approval Date | Draft/NOT APPROVED |
| Prerequisites | Band Saw
|
| Document/Printout | Wood Lathe Certification |
| Required For Tools/Shops | |
| Student: | |
|---|---|
| Trainer: | |
| Date: | |
| Version: | 0.1.0 - Draft/NOT APPROVED: DO NOT USE |
Prerequisite Certifications: Band Saw
Certification required for: Central Machinery 12"X36" Wood Lathe (Wood Shop), Coronet Record Power Wood Lathe (Wood Shop), Powermatic Model 45 (Wood Shop), Rikon 70-305 (Wood Shop), Rikon Woodfast Series (Wood Shop)
DO NOT USE THIS PAGE AS A SIGN OFF SHEET
Please print the document from the download link in the top right of the wiki page instead!
Training Check-Off List:
Tool Anatomy
- Tool rest
- Banjo
- Ways
- tail stock
- drive center
- tailstock live center
- Tailstock
- head stock
- headstock spindle
- spur drive
- Chuck
- control switches-on off speed
- tailstock banjo
- tool rest locks
Pre-Operation
- Examine a blank for cracked or loose bark or loose wood.
- Wear correct face and/or eye protection while working on or standing near a turning lathe.
- Secure or remove loose clothing that might get entangled with the work piece.
Operation
- Properly chucking a blank between centers using a drive spur.
- Adjusting the banjo and tool rest to the proper position in relation to the blank.
- Setting the gap distance between the blank and the tool rest for proper tool support.
- Checking that the tailstock, chuck or drive spur, tool rest and banjo is locked in place prior to turning and during turning.
- Turning the lathe on and off.
- Adjusting the speed of the lathe
- Turner demonstrates the proper use of the swept back gouge to make roughing cuts, slicing cuts, scraping cuts and shear scraping as indicated on the "cheat sheet".
- Turner demonstrates the appropriate use of the scraper to do a shear scrape.
Tool Sharpening
- Turner sets the jig properly and sharpens a swept back gouge.
- Turner sets the jig properly and sharpens a scraper.
Post-Operation
- Work area is cleaned with Shop Vac or broom
- All tools are returned to their proper places
Lockout/Tagout Procedure
- Student imparts lockout/tagout procedure: Tool unplugged and plug wrapped in safe/visible location, tag filled out and posted, notify front desk (if on site) and email Woodshop Lead immediately.
| Pass/Fail: |
|---|
| Comments: |
|---|
| Student Signature: | Date | ||
|---|---|---|---|
| Certifier Signature: | Date |
Certifer: Please scan this QR Code to email info@claremontmakerspace.org, and include a list of students who have passed this test.
Then, return this form to the front desk (even if the student failed!).
